Amigurumi, Amigurumi Doll, Amigurumi Free Patterns

Amigurumi Cute Doll Free Pattern

Tune in to the fact that the process will take 8-10 hours (however, who has what speed).

I want to reassure, the description is not complicated, it will be easy to knit.

As a result, you should get a cute doll, about 18 cm tall (including the bumps).

Pupsik can be not only New Year’s, but also “all-season” 🙂

It all depends on your imagination.

To work you will need:

1. Cotton of 2 colors (I used Pehorka “Baby Cotton” Length of thread in a skein: 330m Weight of a skein: 100g).

For the body and hats in the New Year’s version, green or red (about 1/3 of the coil goes for 1 baby).

In order that would not ripple in the eyes in the master class, I used the color “mint”.

For the head and pens – the color is harsh (about 1/5 skein).

2. Scarf yarn (any remaining yarn can be used).

3. Beads for eyes 2pcs black, diameter – 0.6 or 0.8 mm.

4. Holofiber or synthetic winterizer for stuffing. (About 80 grams depends on how tightly you want to stuff the toy).

5. The needle is 9 cm long.

6. A piece of wire 20 cm.

7. Adhesive plaster in a skein (you need a piece about 10 cm long).

8. Cotton buds 5pcs or dowel 12 * 60 nylon. (Photo will be below).

9. Hook No. 1.25.

10. Knitting needles number 2.

11. Marker for knitting and pins.

12. Dry pastel or pink pencil.

13. Buttons 2 pcs.

14. Positive and confidence that everything will turn out!

Legend:

sc- single crochet.

DC – double crochet.

İnc – increase

dec – decrease

PATTERN @kotiko_toys

Amigurumi ring.

1 step: Make a loop about 2.5 cm from the end of the thread. Place the working thread between the index and middle fingers.

Step 2: Insert the hook into the loop, grab the working thread and pull it out in front of the loop.

Step 3: Grab the working thread and drag it through the loop.

Step 4: Pull out the working thread and tighten. This loop is not considered the first column in the ring.

Step 5: Bring the hook from below under both threads, forming a large loop. Grab a working thread.

Step 6: Pull out the cage and hook the working thread again. Pull the working thread through the two loops located on the hook. Thus, we tied the first single crochet in the amigurumi ring.

We will knit tightly, in a spiral for 2 loops !!!

LEGS.

The color is mint.

1) Magic ring into 5 sc;

2) 1 sc, 4 inc .. (in each loop) = 9 sc;

3) -15) we knit on 9 loops sc (14 rows).

Tie 2 legs. On the right leg we break the thread, leaving a long tail.

On the second we do not break off, we continue to knit the body.

BODY.

The color is mint.

1) Connect the two legs together, making an insert on the sides for this:

we knit on the left leg 5 sc we hang a marker;

further a chain of 10 air loops;

then on the right leg 3 sc, inc., 1 sc, inc., 3 sc;

10 air loops;

on the left leg 3 sc, inc., 1 sc, inc., 3 sc.

All should get 42 sc.

2) 42 sc We knit the stitches of the air chain in 1 loop! On legs for 2 loops;

3) -14) we knit 12 rows (for 2 loops) without changes = 42 sc.

Sew the hole between the legs with the remainder of the thread from the right leg for 1 loop.

We stuff the legs tightly with holofiber. (I use a barbecue stick for this).

15) (5 sc, dec.) 6 times = 36 sc;

16) 36 sc;

17) 36 sc;

18) (4 sc, dec.) 6 times = 30 sc;

19) 30 sc;

20) 30 sc;

21) (3 sc, dec.) 6 times = 24 sc;

22) 24 sc;

23) 24 sc.

We stuff the body tightly with holofiber to half.

24) (2 sc, dec.) 6 times = 18 sc;

25) 18 sc;

26) 18 sc.

HEAD.

Change the color of the thread.

Body color (severe).

27) (2 sc, inc.) 6 times = 24 sc;

28) (3 sc, inc.) 6 times = 30 sc;

29) (4 sc, inc.) 6 times = 36 sc;

30) (5 sc, inc.) 6 times = 42 sc;

31) (6 sc, inc.) 6 times = 48 sc;

32) (7 sc, inc.) 6 times = 54 sc;

33) (8 sc, inc.) 6 times = 60 sc;

34) (9 sc, inc.) 6 times = 66 sc.

Stuff the body. Insert 5 cotton swabs into the neck (fasten with adhesive tape) or a dowel.

If you decide to insert the dowel, then through the crevice in it you need to draw a wire for the hands.

To do this, we introduce the wire from the side, between the 22 and 23 rows of the trunk, then into the crevice, then we bring it out from the other side.

35) – 46) 66 sc (12 rows);

47) (9 sc, dec.) 6 times = 60 sc;

48) (8 sc, dec.) 6 times = 54sc;

49) (7 sc, dec.) 6 times = 48 sc;

50) (6 sc, dec.) 6 times = 42 sc;

51) (5 sc, dec.) 6 times = 36 sc;

52) (4 sc, dec.) 6 times = 30 sc.

Fill your head to half.

53) (3 sc, dec.) 6 times = 24 sc;

54) (2 sc, dec.) 6 times = 18 sc;

55) (1 sc, dec.) 6 times = 12 sc.

Fill the rest of the head.

Break the thread, leaving a long tail. (we will do eye tightening)

Pull off the hole.

DRAWING.

Decide which side the face will be on (no difference), outline the location

the eye (with pins) I have it between 12 and 13 next to the head. Between the eyes should be 7-8 loops (as you like)

Insert the remainder of the thread into a long needle and stick it into the center of the crown, withdraw between the rows in the proposed location of the left eye, then insert the needle into the adjacent loop, of the same row and bring it to the location of the right eye, then into the left eye and pull it several times eye sockets ”between each other, then withdraw to the crown and fix with a nodule.

Sew black bead eyes. (to places of tightening on the head)

PENS.

Body color (severe).

1) Magic ring into 4 sc;

2) incavations in each loop = 8 sc;

3) 8 sc;

4) 3 DC with one vertex, 7 sc = 8 sc – for one arm;

(7 sc, 3 DC with one vertex = 8 sc – for the other hand);

5) 8 sc.

Change the color to mint.

6) -24 8 sc (19 rows);

We break the thread, leaving a long tail. (We will sew them).

Attach the finished handles to the wire, bend the last loop at the desired level, fixing it with adhesive tape.

Put the handles on the wire, pull it to the body and carefully sew on.

Whoever causes this difficulty, or if there is no wire, you can simply sew or tighten the loops of the hand at the top and sew to the body.

Hats.

The color is mint.

1) Magic ring into 6 sc;

2) 6 inc. = 12 sc;

3) (1 sc, inc.) 6 times = 18 sc;

4) (2 sc, inc.) 6 times = 24 sc;

5) (3 sc, inc.) 6 times = 30 sc;

6) (4 sc, inc.) 6 times = 36 sc;

7) (5 sc, inc.) 6 times = 42 sc;

8) (6 sc, inc.) 6 times = 48 sc;

9) (7 sc, inc.) 6 times = 54 sc;

10) (8 sc, inc.) 6 times = 60 sc;

11) (9 sc, inc.) 6 times = 66 sc;

11) -23) 66 sc (13 rows).

We break the thread, leaving a long tail (we will sew them).

CONES.

The color is mint.

Tie two identical bumps and sew on the sides (Christmas color).

Knit 2 pieces

1) Magic ring into 6 sc;

2) 6 inc. = 12 sc;

3) (1 sc, inc.) 6 times = 18 sc;

4) (2 sc, inc.) 6 times = 24 sc;

5) (3 sc, inc.) 6 times = 30 sc;

6) (4 sc, inc.) 6 times = 36 sc;

7) -10) 36 sc.

We break the thread, leaving a long tail (we will sew them).

SCARF.

Color as desired.

We knit with needles stitch, arbitrarily gaining (depending on the yarn) the number of loops. And that

long that will suit.

I knitted with needles number 2 on 11 loops, 142 rows.

1p front loops;

2 r wrong side.

Alternate to the desired length.

If you crochet, then depending on the desired width, select the number of air loops. For example, 6 vp, then 2 lifting loops, rotation, 5 DC.

Further turning rows, to the desired length.

ASSEMBLY AND DECORATION

1. Put a hat on your head (should sit tight), sew on, grabbing a thread in several places.

2. Arrange the cones on the cap as you like and sew them with a holofiber.

3. Cross-stitch the navel.

4. Brown the cheeks with dry pastel or a pencil lead rubbed into dust (use a brush or a foam swab).

5. Sew buttons on the hat.

6. Tie a scarf.

New Year baby doll is ready!

Knit with pleasure

Leave a Reply

Your email address will not be published. Required fields are marked *